|
 |
| News |
| A Brief Discussion of Europe and the United States exports of the standard mold |
| Time：2010-1-30 9:46:46 Author：admin |
A Brief Discussion of Europe and the United States exports of the standard mold
1. Mold embryo: use of "LKM" mold.
2. Guide column flip (formerly the mold guide column, the latter die guide sets).
3. A board panel and there must be two pipes between the nail for control bits.
4. Thimble plate must have the guide columns (ie care Division).
5. Steel: Common Hard Materials: LKM2083, LKM2344, LKM2767. General Hard to 52 ~ 54HRC.
6. Positioning Ring: positioning ring higher panel 4mm, if insulation boards should be positioned above the insulation board, Central 4mm. Common Positioning ring diameter: Ø90, Ø100, Ø110, Ø120, Ø125, Ø150, Ø160.
7. Squirt mouth arc: Common FLAT (ie flat), and two kinds of R15.5. Squirt mouth opening arc minimum guaranteed: Ø3.5mm.
8. Thimble, the Secretary to adopt a barrel "DME" "HASCO" standard.
9. Shuikou: popular diving and hot runner (used DME, MasterFlow)
10. Slider: slider to do positioning, spacing. (Common wave bead screws, springs location, cup head screw spacing).
11. Briquette: Briquette Screw Peace common cup head screws head screws.
12. Slant: slant to be done and wear-resistant slide guide blocks, materials, use of bronze.
13. Connecting blocks: see icon.
14. Carrying water plugs: Adopting a "HASCO" of 1 / 4 "BRS and 1 / 8" BRS two kinds.
15. Carrying water within the next hole: mold from top to bottom processing, so do not die machining. Common Specifications: Ø20x20, Ø25x20..
16. ID: often part name, part number, company name, cavity identification, material identification, recycling logo, date of chapter.
17. Die surface requirements: Sparkerusion (fire patterns), Polished (Provincial mold), Photo etched (etch).
18. Mold embryo A, B should be between the lock plate module (2).
19. Die packaging using butter, transparent plastic bags, disinfection wooden boxes.
20. Die Tags: mold number, part number, product name, date of manufacture, mold weight. |
 |
|
|
|
|
 |
|
